HP ProLiant G8
Management Component Pack
The Linux Management Component Pack provides agent software for use on community-supported distributions.
hp-health HPE System Health Application and Command line Utilities (Gen9 and earlier)
hponcfg HPE RILOE II/iLO online configuration utility
amsd HPE Agentless Management Service (Gen10 only)
hp-ams HPE Agentless Management Service (Gen9 and earlier)
hp-snmp-agents Insight Management SNMP Agents for HPE ProLiant Systems (Gen9 and earlier)
hpsmh HPE System Management Homepage (Gen9 and earlier)
hp-smh-templates HPE System Management Homepage Templates (Gen9 and earlier)
ssacli HPE Command Line Smart Storage Administration Utility
ssaducli HPE Command Line Smart Storage Administration Diagnostics
ssa HPE Array Smart Storage Administration Service
rpm install
Cut-n-paste the following section (substituting distribution, architecture and project version) into /etc/yum.repos.d/mcp.repo on your system:
[mcp]
name=Management Component Pack
baseurl=http://downloads.linux.hpe.com/repo/mcp/dist/dist_ver/arch/project_ver
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/GPG-KEY-mcp
Download GPG public
rpm --import http://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub
Where:
dist: centos, fedora, opensuse, oracle, asianux
dist_ver: Browse repo to identify supported distribution versions
arch: i386, x86_64
project_ver: current, 11.30, 11.21, 11.05, 10.62, 10.50, 10.40, 10.20, 10.00, 9.30, 9.25
List the packages in the repository
$ yum --disablerepo="*" --enablerepo="short_repo_name" list available
Install a specific package
$ yum install <packagename>
CentOS 7
cat <<'EOF' >>/etc/yum.repos.d/mcp.repo
[HP-mcp]
name=HP Management Component Pack for ProLiant
baseurl=http://downloads.linux.hpe.com/SDR/repo/mcp/centos/7.3/x86_64/current/
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/GPG-KEY-mcp
EOF
wget http://downloads.linux.hpe.com/SDR/repo/mcp/GPG-KEY-mcp -O /etc/pki/rpm-gpg/GPG-KEY-mcp
deb install
Cut-n-paste the following section (substituting distribution, architecture and project version) into /etc/apt/sources.list.d/mcp.list on your system:
# HPE Management Component Pack
deb http://downloads.linux.hpe.com/SDR/repo/mcp dist/project_ver non-free
Where: dist: bionic, xenial, trusty, precise, stretch, jessie, squeeze, wheezy project_ver: current, 11.30, 11.21, 11.05, 10.80, 10.60, 10.50, 10.40, 9.50, 9.40
Install the HPE public gpg key
curl http://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub | apt-key add -
Update the local apt indexes
# apt-get update
Search for a specific package
# apt-cache search <packagename> # browse debs
Install a specific package
# apt-get install <packagename>
Debian 9
echo "# HPE Management Component Pack" >/etc/apt/sources.list.d/hp-nonfree.list
echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp jessie/current non-free" >>/etc/apt/sources.list.d/hp-nonfree.list
curl http://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub | apt-key add -
iLO pwd reset
yum install hponcfg -y
apt-get install hponcfg -y
reset Administrator pwd
vim iLO4_set_password.xml
<<ribcl version="2.0">
<login user_login="Administrator" password="boguspassword">
<user_info mode="write">
<mod_user user_login="Administrator">
<password value="newpass">
</password>
</mod_user>
</user_info>
</login>
</RIBCL>
where ?newpass? - new pwd
$ hponcfg -f passwd_reset_ilo.xml -l log.txt
Firmware Revision = 1.92 Device type = iLO Driver name = hpilo
reset other user pwd
vim iLO4_set_password.xml
<ribcl version="2.0">
<login user_login="Administrator" password="boguspassword">
<user_info mode="write">
<mod_user user_login="root">
<password value="root123">
</password>
</mod_user>
</user_info>
</login>
</RIBCL>
where ?root? - user login where ?root123? - new pwd
$ hponcfg -f passwd_reset_ilo.xml -l log.txt
Firmware Revision = 1.92 Device type = iLO Driver name = hpilo