Cisco Catalist: различия между версиями

Версия 10:44, 10 мая 2017

copy flash:(Old IOS Image) tftp:

Delete flash:(Old IOS Image)

copy tftp: flash: tftp IP :XXX.XXX.XXX.XXX

Sourcename :(New IOS image file name)--Stored in TFTP Root directory. Designation name : enter

verify /md5 flash: (New IOS image file name)

compare the MD5 version using winMd5Sum if both are same then ok

configure terminal boot system flash: (New IOS image file name)

end

wr mem

show boot show version show flash

reload

@@ Строка 4: / Строка 4: @@
 === Обновление прошивки ===
 ==== tftp ====
+[http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41542-191.html#concept9 Step-by-Step Procedure for the 2950/2955 with only the IOS image (.bin file)]
+[http://www.cisco.com/c/en/us/support/docs/routers/2500-series-routers/15092-copyimage.html#copying_one_router Copying From One Router to Another]
+* Step : 1 BACKUP REQUIRED:
+copy flash:(Old IOS Image) tftp:
+*Step : 2 Delete IOS :
+Delete flash:(Old IOS Image)
+* Step : 3 Upgrade IOS :
+copy  tftp: flash:
+tftp IP :XXX.XXX.XXX.XXX
+Sourcename :(New IOS image file name)--Stored in TFTP Root directory.
+Designation name :
+enter
+* Step 4 : To Verify the MD5 :
+verify /md5 flash: (New IOS image file name)
+''compare the MD5 version using winMd5Sum if both are same then ok''
+* Step 5 : Set Boot path
+configure terminal
+boot system flash: (New IOS image file name)
+end
+wr mem
+show boot
+show version
+show flash
+reload
 === IOS ===
 ==== Catalist 2950 EI ====