Cisco Catalist: различия между версиями
Перейти к навигации
Перейти к поиску
Sol (обсуждение | вклад) (Новая страница: «Категория:Комутаторы == Прошивки == === Обновление прошивки === ==== tftp === === IOS === ==== Catalist 2950 EI…») |
Sol (обсуждение | вклад) (→IOS) |
||
(не показаны 2 промежуточные версии этого же участника) | |||
Строка 3: | Строка 3: | ||
== Прошивки == | == Прошивки == | ||
=== Обновление прошивки === | === Обновление прошивки === | ||
− | ==== tftp === | + | ==== tftp ==== |
+ | [http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41542-191.html#concept9 Step-by-Step Procedure for the 2950/2955 with only the IOS image (.bin file)] | ||
+ | |||
+ | [http://www.cisco.com/c/en/us/support/docs/routers/2500-series-routers/15092-copyimage.html#copying_one_router Copying From One Router to Another] | ||
+ | |||
+ | |||
+ | * Step : 1 BACKUP REQUIRED: | ||
+ | |||
+ | copy flash:(Old IOS Image) tftp: | ||
+ | *Step : 2 Delete IOS : | ||
+ | Delete flash:(Old IOS Image) | ||
+ | |||
+ | * Step : 3 Upgrade IOS : | ||
+ | |||
+ | copy tftp: flash: | ||
+ | tftp IP :XXX.XXX.XXX.XXX | ||
+ | |||
+ | Sourcename :(New IOS image file name)--Stored in TFTP Root directory. | ||
+ | Designation name : | ||
+ | enter | ||
+ | * Step 4 : To Verify the MD5 : | ||
+ | |||
+ | verify /md5 flash: (New IOS image file name) | ||
+ | |||
+ | ''compare the MD5 version using winMd5Sum if both are same then ok'' | ||
+ | |||
+ | * Step 5 : Set Boot path | ||
+ | configure terminal | ||
+ | boot system flash: (New IOS image file name) | ||
+ | |||
+ | end | ||
+ | |||
+ | wr mem | ||
+ | |||
+ | show boot | ||
+ | show version | ||
+ | show flash | ||
+ | |||
+ | reload | ||
+ | |||
=== IOS === | === IOS === | ||
+ | [https://webko.net.ua/files/ios/ more] | ||
==== Catalist 2950 EI ==== | ==== Catalist 2950 EI ==== | ||
+ | [[Файл:C2950-i6k2l2q4-mz.121-22.EA13.zip|c2950-i6k2l2q4-mz.121-22.EA13]] | ||
+ | |||
+ | [[Файл:C2950-i6q4l2-mz.121-22.EA4.zip|C2950-i6q4l2-mz.121-22.EA4]] |
Текущая версия на 14:39, 21 мая 2017
Прошивки
Обновление прошивки
tftp
Step-by-Step Procedure for the 2950/2955 with only the IOS image (.bin file)
Copying From One Router to Another
- Step : 1 BACKUP REQUIRED:
copy flash:(Old IOS Image) tftp:
- Step : 2 Delete IOS :
Delete flash:(Old IOS Image)
- Step : 3 Upgrade IOS :
copy tftp: flash: tftp IP :XXX.XXX.XXX.XXX
Sourcename :(New IOS image file name)--Stored in TFTP Root directory. Designation name : enter
- Step 4 : To Verify the MD5 :
verify /md5 flash: (New IOS image file name)
compare the MD5 version using winMd5Sum if both are same then ok
- Step 5 : Set Boot path
configure terminal boot system flash: (New IOS image file name)
end
wr mem
show boot show version show flash
reload